Stone Brick House Exterior Dream Homes_5
Stone Brick House Exterior Dream Homes_5

Stone Brick House Exterior Dream Homes

Posted on

Stone Brick House Exterior Dream Homes

Stone Brick House Exterior Dream Homes. A home that’s energy-efficient is actually healthier and more cost-effective. Energy efficiency modifications in your home can eliminate or at least lessen the poor quality of air that’s brought in by various weather conditions. One way to make your home energy efficient is to pay attention to the building materials and to the house design.

In Australia, bricks have long been recognized as commonly chosen building materials. In fact, nearly 90% of built houses are constructed using bricks. Because of the campaign to decrease energy consumption in its entire form, there are building regulations these days that require the newly built houses to be more energy efficient. There are some things you need to know in order to come up with an informed choice. Read also: Modern Exterior Design Ideas

Think about the amount of energy that’s usually consumed in your home. Maybe, you’ll be surprised to find out that a large part of the home energy is used up in cooling and heating. Cooking and lighting, even when put together, comprise only a few percents. Hence, anything which can help lessen the cooling and heating bills of your home will be a good investment, right? But the question is, do you think it is possible to cut down cooling and heating energy consumption while keeping up a practical thermal comfort inside your home? It is in this case that passive design comes into play.

Passive design handles the energy coming from the sun to improve the house’s cooling and heating in a natural way. There are actually four major principles of passive design. These are orientation, ventilation, insulation and thermal mass. Read: Stone Wall Interior Design Ideas

Orientation – The huge glass portion in the north part allows the low winter sun in. And to block the high summer sun, simple shading like eaves is applied.

Ventilation – When the crest of summertime has already passed, air is permitted to get in and go out of the house in order to make it cool in a natural manner. To optimize cross ventilation, either side of the building or the house has generous openings with almost negligible internal obstructions.

Insulation – The insulation in the wall and ceiling serves as the obstacle to heat transportation. Insulation efficiency can be calculated by means of its R-value but it doesn’t present the whole issue. Various walls may have the same R-value but may not work the same.

Thermal Mass – Wall materials that are dense and heavy, like bricks, suck up the heat and hamper its conveyance through the walls. Through these, temperature changes become moderate and the heat absorption during summer is significantly hampered. Compared to brick walls, the lightweight materials have very low thermal mass. And because of this thermal mass, brick walls turn out to be more capable of moderating home temperature even if they have similar R-values.

Now come to think of thermal mass and consider brick stone. The first two techniques in the passive design, which are orientation and ventilation, need to be set up in the house. And your home material preferably has a major effect on the quantity of thermal mass in a house or a building. One of the simplest and most economical ways to put up thermal mass is through bricks. Those bricks that are made from clay contain very high thermal mass. They are available to make your home well ventilated, comfortable and more energy efficient.

Article Source: